Gallery
Videos

Inflatable Arch 8m x 4.6m INFL8 Sprint

SKU: 13521
Quantity:
Est Delivery 10th December.
Total: £1974.99

INFL8 Sprint8m x 4.6m INFL8 Sprint Inflatable Arch, printed with custom branding
Printed inflatable arch

Description

The 8m x 4.6m INFL8 Sprint Inflatable Arch is the mid-range INFL8 arch and the workhorse of the range, for start and finish lines, paddock entrances and regional events. It spans 8m wide and 4.6m high on 80cm diameter sealed-air tubes.

The whole Dacron skin is dye-sublimation printed to your design, so your start line, finish gate or entrance carries your branding from every angle.

Sealed air means no constant blower: the arch holds pressure for up to 20 days. Once deflated, the tubes pack into the arch's own zip-together weighted feet, so there is no separate case to carry.

  • 8mSpan
  • 4.6mHeight
  • 80cmTube diameter
  • 39kgPacked, 81cm x 81cm x 45cm
  • 20 daysHolds air for up to 20 days
Spec sheet

Specifications

  • Size: 8m x 4.6m (width x height)
  • Tube diameter: 80cm
  • Air system: sealed air, no continuous blower
  • Air retention: up to 20 days
  • Packed size: 81cm x 81cm x 45cm
  • Weight: 39kg
  • Material: Dacron, dye-sublimation printed to your design
  • Base: reinforced weighted feet that double as the storage case
How it works

Up Fast, Up All Weekend

Sealed air
Inflate once with an electric pump and the arch holds its shape for up to 20 days, with no blower running and no generator noise at the start line.
Anchored at the feet
The reinforced weighted feet keep it stable. Add pegs or straps on soft ground and extra weights on hard standing.
Self-contained storage
The deflated tubes pack into the zip-together weighted feet, 81cm x 81cm x 45cm, ready for the next event.
Printed inflatable arch over a race start line
Where it works

Where the INFL8 Sprint Arch Works Best

  • Start and finish lines for races and time trials
  • Paddock and hospitality entrances
  • Sponsor branding over the pit lane or podium
  • Sports festivals and trade show entrances
Made to order

How to Order Your Printed Arch

  • Send your artworkYour logos, sponsors and colours for the full arch skin.
  • Approve your proofWe lay out the design for you to check before printing.
  • We print and buildPrinted inflatables typically take two to three weeks from artwork approval.
  • Inflate and goPump it up, anchor the feet and it holds for up to 20 days.

Not sure which arch suits your event? Tell us the width you need to span and how it will be used.

INFL8 Sprint 8m x 4.6m Arch FAQs

How big is the INFL8 Sprint 8m x 4.6m arch?
It spans 8m wide and stands 4.6m high, on 80cm diameter tubes. Packed, it measures 81cm x 81cm x 45cm and weighs 39kg.
Does the arch need a blower running all day?
No. The INFL8 arch is sealed air. Inflate it once with an electric pump and it holds pressure for up to 20 days.
How is the arch printed?
The whole Dacron skin is dye-sublimation printed in full colour to your design, so your branding shows from every angle.
How do I anchor an inflatable arch?
The reinforced weighted feet keep it stable. Add pegs or straps on soft ground and extra weights on hard standing.
What is the difference between the Club, Sprint and Elite arches?
The Club is the 6m entry-level arch with 60cm tubes. The Sprint comes in 6m and 8m widths with 80cm tubes. The Elite comes in 8m and 12m widths with 90cm tubes for the biggest events.
The INFL8 arch range

Club, Sprint and Elite Arches

Three tiers, five sizes. Bigger tube diameters give a bolder arch and more print area: 60cm on the Club, 80cm on the Sprint and 90cm on the Elite.

Pair your arch with a matching INFL8 inflatable race shelter, printed flags and banners for a complete branded paddock.



Good Afternoon, how can I assist you today?

Assistance
ExpandAssistance   Alexandria