Gallery
Videos

Inflatable Arch 12m x 4.8m INFL8 Elite

SKU: 13523
Quantity:
Est Delivery 10th December.
Total: £2549.99

INFL8 Elite12m x 4.8m INFL8 Elite Inflatable Arch, printed with custom branding
Printed inflatable arch

Description

The 12m x 4.8m INFL8 Elite Inflatable Arch is the giant INFL8 arch, built for headline start and finish gates, championship paddocks and major events. It spans 12m wide and 4.8m high on 90cm diameter sealed-air tubes.

The whole Dacron skin is dye-sublimation printed to your design, so your start line, finish gate or entrance carries your branding from every angle.

Sealed air means no constant blower: the arch holds pressure for up to 20 days. Once deflated, the tubes pack into the arch's own zip-together weighted feet, so there is no separate case to carry.

  • 12mSpan
  • 4.8mHeight
  • 90cmTube diameter
  • 52kgPacked, 90cm x 90cm x 50cm
  • 20 daysHolds air for up to 20 days
Spec sheet

Specifications

  • Size: 12m x 4.8m (width x height)
  • Tube diameter: 90cm
  • Air system: sealed air, no continuous blower
  • Air retention: up to 20 days
  • Packed size: 90cm x 90cm x 50cm
  • Weight: 52kg
  • Material: Dacron, dye-sublimation printed to your design
  • Base: reinforced weighted feet that double as the storage case
How it works

Up Fast, Up All Weekend

Sealed air
Inflate once with an electric pump and the arch holds its shape for up to 20 days, with no blower running and no generator noise at the start line.
Anchored at the feet
The reinforced weighted feet keep it stable. Add pegs or straps on soft ground and extra weights on hard standing.
Self-contained storage
The deflated tubes pack into the zip-together weighted feet, 90cm x 90cm x 50cm, ready for the next event.
Printed inflatable arch over a race start line
Where it works

Where the INFL8 Elite Arch Works Best

  • Headline start and finish gates
  • Championship paddock and fan zone entrances
  • Sponsor and title partner branding at major events
  • Large trade shows, festivals and stadium events
Made to order

How to Order Your Printed Arch

  • Send your artworkYour logos, sponsors and colours for the full arch skin.
  • Approve your proofWe lay out the design for you to check before printing.
  • We print and buildPrinted inflatables typically take two to three weeks from artwork approval.
  • Inflate and goPump it up, anchor the feet and it holds for up to 20 days.

Not sure which arch suits your event? Tell us the width you need to span and how it will be used.

INFL8 Elite 12m x 4.8m Arch FAQs

How big is the INFL8 Elite 12m x 4.8m arch?
It spans 12m wide and stands 4.8m high, on 90cm diameter tubes. Packed, it measures 90cm x 90cm x 50cm and weighs 52kg.
Does the arch need a blower running all day?
No. The INFL8 arch is sealed air. Inflate it once with an electric pump and it holds pressure for up to 20 days.
How is the arch printed?
The whole Dacron skin is dye-sublimation printed in full colour to your design, so your branding shows from every angle.
How do I anchor an inflatable arch?
The reinforced weighted feet keep it stable. Add pegs or straps on soft ground and extra weights on hard standing.
What is the difference between the Club, Sprint and Elite arches?
The Club is the 6m entry-level arch with 60cm tubes. The Sprint comes in 6m and 8m widths with 80cm tubes. The Elite comes in 8m and 12m widths with 90cm tubes for the biggest events.
The INFL8 arch range

Club, Sprint and Elite Arches

Three tiers, five sizes. Bigger tube diameters give a bolder arch and more print area: 60cm on the Club, 80cm on the Sprint and 90cm on the Elite.

Pair your arch with a matching INFL8 inflatable race shelter, printed flags and banners for a complete branded paddock.



Good Afternoon, how can I assist you today?

Assistance
ExpandAssistance   Alexandria