Gallery
Videos

Slate Grey Swisstrax Ribtrax Home

SKU: 13614
Quantity:
Est Delivery 20th November.
Total: £4.99

Ribtrax Home in Slate Grey

Description

Slate Grey Ribtrax Home is the lower-cost Swisstrax Ribtrax tile in Slate Grey, made for home garages, detailing studios and showrooms. Each 400mm x 400mm tile has an open ribbed surface over a 3mm channelling system, is rated 20T/m² rollover for domestic traffic and carries a 5-year warranty.

Slate Grey is the practical workshop colour. The mid-dark grey hides everyday dirt, tyre marks and dust better than almost any other colour, so the floor looks tidy between cleans.

The tiles clip together by hand with no adhesive or tools, straight over concrete, asphalt or sealed screed. It is a stocked colour, so it goes out on next-day delivery.

  • 400 x 400mmSame footprint as every Swisstrax tile
  • 20T/m²Rollover strength for domestic traffic
  • Approx. 600gLight to carry, lay and lift
  • 5 yearsWarranty on every tile
  • Slate GreyIn stock, next-day delivery
Choosing Slate Grey

Where Slate Grey Ribtrax Home Works Best

It works as a main colour for busy floors, with brighter colours used for walkways, borders and bay markings.

  • Busy workshops and service bays
  • Pit garages that see a lot of traffic
  • Home garages that double as a workspace
  • A neutral base for coloured borders

Colours That Pair With Slate Grey

Every Ribtrax Home colour clips together the same way, so you can mix colours for chequers, borders, walkways and bays. Try layouts in the Swisstrax floor designer.

Spec sheet

Specifications

  • Tile size: 400mm x 400mm
  • Weight: approx. 600g per tile
  • Material: UV-stabilised polypropylene, made in France
  • Surface: open ribbed design with a 3mm channelling system
  • Load: 20T/m² rollover strength for domestic vehicle traffic
  • Use: indoor or outdoor
  • Colours: Jet Black, Slate Grey and Light Grey
  • Warranty: 5 years
  • Installation: clips together by hand, no adhesive or tools
How it works

Why Choose Ribtrax Home

Genuine Swisstrax
The patented Ribtrax interlocking design from Swisstrax itself, at a price close to imported copies.
Rated for domestic traffic
A rollover strength of 20T/m² covers everyday cars, motorbikes and garage storage.
Cleaner floor
Dirt and liquids drop through the ribbed surface into a 3mm channelling system below.
Easy to move
At around 600g a tile, it suits show and exhibition floors that go down and come up again.
Plan your floor

How Many Slate Grey Ribtrax Home Tiles Do You Need?

Each tile is 400mm x 400mm, so one square metre takes 6.25 tiles. The tile calculator on the Ribtrax Home buy page works out tiles, edges and corners from your room size, or use the steps below.

  • Measure the floorMeasure wall to wall, including door swings and the area where ramps will sit.
  • Work out tilesMultiply the floor area in square metres by 6.25, round up to whole tiles and add a few spares for cuts.
  • Add ramped edgesRamped edges finish every exposed side. Allow about 2.5 edge pieces per metre of exposed edge.
  • Add cornersAdd a corner piece wherever two ramped sides meet, up to four for a floor with no walls.

Send us the size of the space and how it is used, and we will spec your Slate Grey floor, including edges, corners and any colour borders.

Slate Grey Ribtrax Home FAQs

What is Slate Grey Ribtrax Home?
Slate Grey Ribtrax Home is the Ribtrax Home Swisstrax garage floor tile in the colour Slate Grey. Each 400mm x 400mm tile has an open ribbed surface over a 3mm channelling system, is rated 20T/m² rollover for domestic traffic and carries a 5-year warranty.
Is Slate Grey Ribtrax Home in stock?
Yes. Slate Grey is a stocked Ribtrax Home colour and goes out on next-day delivery.
What colours go with Slate Grey garage floor tiles?
Slate Grey pairs well with Jet Black and Light Grey. Every Ribtrax Home colour clips together the same way, so you can mix colours for chequers, borders, walkways and parking bays.
How many Slate Grey Ribtrax Home tiles do I need?
One square metre takes 6.25 tiles, because each tile is 400mm x 400mm. Multiply your floor area by 6.25, round up and add a few spares for cuts. Allow about 2.5 ramped edge pieces per metre of exposed edge.
Do I need to glue Ribtrax Home tiles down?
No. The tiles clip together by hand with no adhesive or tools and lay straight over sound, level concrete, asphalt or sealed screed. The floor can be used as soon as it is down.
More colours

All Ribtrax Home Colours

See every Ribtrax Home colour, or buy Ribtrax Home and choose your colour there. Also available as Slate Grey Ribtrax Pro and Slate Grey Smoothtrax.

Not sure Ribtrax Home is the right tile? Compare it with the other Swisstrax tiles in our Swisstrax tile comparison, or read the pit garage, home garage and detailing studio flooring guides.



Good Afternoon, how can I assist you today?

Assistance
ExpandAssistance   Alexandria