Gallery
Videos

Light Grey Swisstrax Ribtrax Home

SKU: 13613
Quantity:
Est Delivery 20th November.
Total: £4.99

Ribtrax Home in Light Grey

Description

Light Grey Ribtrax Home is the lower-cost Swisstrax Ribtrax tile in Light Grey, made for home garages, detailing studios and showrooms. Each 400mm x 400mm tile has an open ribbed surface over a 3mm channelling system, is rated 20T/m² rollover for domestic traffic and carries a 5-year warranty.

Light Grey is the brightest Ribtrax Home colour. It keeps a home garage or studio light and airy, and gives cars and bikes a clean, showroom-style backdrop.

The tiles clip together by hand with no adhesive or tools, straight over concrete, asphalt or sealed screed. It is a stocked colour, so it goes out on next-day delivery.

  • 400 x 400mmSame footprint as every Swisstrax tile
  • 20T/m²Rollover strength for domestic traffic
  • Approx. 600gLight to carry, lay and lift
  • 5 yearsWarranty on every tile
  • Light GreyIn stock, next-day delivery
Choosing Light Grey

Where Light Grey Ribtrax Home Works Best

It shows dirt more than the darker greys, so it suits floors that are swept often, or works as borders and walkways around Jet Black or Slate Grey.

  • Home garages that want a bright, showroom feel
  • Detailing studios and car showrooms
  • Borders and walkways on darker floors
  • Garden rooms and home gyms

Colours That Pair With Light Grey

Every Ribtrax Home colour clips together the same way, so you can mix colours for chequers, borders, walkways and bays. Try layouts in the Swisstrax floor designer.

Spec sheet

Specifications

  • Tile size: 400mm x 400mm
  • Weight: approx. 600g per tile
  • Material: UV-stabilised polypropylene, made in France
  • Surface: open ribbed design with a 3mm channelling system
  • Load: 20T/m² rollover strength for domestic vehicle traffic
  • Use: indoor or outdoor
  • Colours: Jet Black, Slate Grey and Light Grey
  • Warranty: 5 years
  • Installation: clips together by hand, no adhesive or tools
How it works

Why Choose Ribtrax Home

Genuine Swisstrax
The patented Ribtrax interlocking design from Swisstrax itself, at a price close to imported copies.
Rated for domestic traffic
A rollover strength of 20T/m² covers everyday cars, motorbikes and garage storage.
Cleaner floor
Dirt and liquids drop through the ribbed surface into a 3mm channelling system below.
Easy to move
At around 600g a tile, it suits show and exhibition floors that go down and come up again.
Plan your floor

How Many Light Grey Ribtrax Home Tiles Do You Need?

Each tile is 400mm x 400mm, so one square metre takes 6.25 tiles. The tile calculator on the Ribtrax Home buy page works out tiles, edges and corners from your room size, or use the steps below.

  • Measure the floorMeasure wall to wall, including door swings and the area where ramps will sit.
  • Work out tilesMultiply the floor area in square metres by 6.25, round up to whole tiles and add a few spares for cuts.
  • Add ramped edgesRamped edges finish every exposed side. Allow about 2.5 edge pieces per metre of exposed edge.
  • Add cornersAdd a corner piece wherever two ramped sides meet, up to four for a floor with no walls.

Send us the size of the space and how it is used, and we will spec your Light Grey floor, including edges, corners and any colour borders.

Light Grey Ribtrax Home FAQs

What is Light Grey Ribtrax Home?
Light Grey Ribtrax Home is the Ribtrax Home Swisstrax garage floor tile in the colour Light Grey. Each 400mm x 400mm tile has an open ribbed surface over a 3mm channelling system, is rated 20T/m² rollover for domestic traffic and carries a 5-year warranty.
Is Light Grey Ribtrax Home in stock?
Yes. Light Grey is a stocked Ribtrax Home colour and goes out on next-day delivery.
What colours go with Light Grey garage floor tiles?
Light Grey pairs well with Jet Black and Slate Grey. Every Ribtrax Home colour clips together the same way, so you can mix colours for chequers, borders, walkways and parking bays.
How many Light Grey Ribtrax Home tiles do I need?
One square metre takes 6.25 tiles, because each tile is 400mm x 400mm. Multiply your floor area by 6.25, round up and add a few spares for cuts. Allow about 2.5 ramped edge pieces per metre of exposed edge.
Do I need to glue Ribtrax Home tiles down?
No. The tiles clip together by hand with no adhesive or tools and lay straight over sound, level concrete, asphalt or sealed screed. The floor can be used as soon as it is down.
More colours

All Ribtrax Home Colours

See every Ribtrax Home colour, or buy Ribtrax Home and choose your colour there.

Not sure Ribtrax Home is the right tile? Compare it with the other Swisstrax tiles in our Swisstrax tile comparison, or read the pit garage, home garage and detailing studio flooring guides.



Good Afternoon, how can I assist you today?

Assistance
ExpandAssistance   Alexandria