What is Smoothtrax®?
Smoothtrax® is a 40×40 cm interlocking tile with a closed, satin finish. It gives studios and show spaces the clean, reflective look they need while staying easy to maintain. Click to assemble, trim to fit, and edge for safe transitions.
Studio-grade finish
Sleek surface ideal for detailing, PPF/ceramic, photo bays and handovers.
Easy to clean
Closed profile wipes down quickly; lift tiles for deeper cleans when needed.
Mix with Ribtrax®
Same height & edging for seamless wet/dry or work/display zone combinations.
No adhesives
Tiles lock together; add ramps and corners at doors and walkways.
Where Smoothtrax® excels
- Workshops & service bays — use Smoothtrax® for finished areas; border with Ribtrax® where drainage matters.
- Events & handover zones — crisp colour blocking and accent borders for a pro, camera-ready look.
Colours & pattern ideas
- Studio frame: a darker field with light border to spotlight the vehicle.
- Accent runway: a single stripe guiding customers to the reveal bay.
- Brand zone: team colours under the car with neutral walkways.
Edges, corners & mixing tiles
Finish your Smoothtrax® layout with matching ramped edges and corners for smooth, trip-safe transitions. Planning a hybrid studio? Combine Smoothtrax® display areas with Ribtrax® in wet or prep zones—both systems share tile height and edge pieces.
- Orientation: lay tiles with pegged connectors facing forward so looped ramps clip on cleanly.
- Linear coverage: edge pieces are 40 cm wide—allow ~2.5 per metre of exposed edge.
- Contrast counts: a lighter entrance ramp improves visibility on camera and in person.
Specs snapshot
- Tile size: 40 cm × 40 cm
- Coverage per tile: ~0.16 m²
- Tiles per m²: ~6.25 (round up to allow for cuts/patterns)
- Profile: closed, satin-smooth surface for easy wipe-downs
- Mix & match: same height & edging as Ribtrax®
- Install: no adhesives; mallet-fit; trim with a fine-tooth blade/jigsaw
Ready to build your Smoothtrax® floor?
Pick colours, add ramps and corners, and generate an instant count. Samples available if you want to feel the finish first.
Smoothtrax® FAQs
Is Smoothtrax® good for detailing and photo studios?
Yes — the satin, closed surface wipes clean and delivers controlled reflections that look great on camera.
Can I combine Smoothtrax® with Ribtrax®?
Absolutely. They share the same height and edging, so you can transition cleanly between studio and prep/wet areas.
Does Smoothtrax® need glue?
No adhesives required. Tiles interlock mechanically. Use ramped edges and corners at thresholds.
How do I maintain the floor?
Sweep or vacuum as normal. For deeper cleans, lift a section to access the slab beneath, then click tiles back into place.
What coverage should I expect per tile?
Each tile is 40×40 cm (~0.16 m²). Order a little extra for cuts and pattern alignment.
